cavanaug@lees.cogsci.uiuc.edu (John Cavanaugh) (01/06/91)
Im having some problems installing TeX on my Sparc running
OS 4.0.3. The make goes fine and so does the make install. But when
trying to run 'tex trip.tex' I get all kinds of errors telling me that
some fonts are screwed up or something.
Any help would be greatly appreciated.
*******************************************************************************
* Output from trip.log ********************************************************
*******************************************************************************
This is TeX, C Version 3.0 (format=plain 91.1.5) 5 JAN 1991 16:18
**&tex trip.tex
(trip.tex
! Font \nullfont has only 7 fontdimen parameters.
<recently read> \nullfont
l.21 \fontdimen12\nullfont
=13pt % give the null font more parameters
?
! Bad character code (256).
<to be read again>
-
l.26 \nonstopmode\lccode256-
0\mathchardef\a="8000\def\a{ SCALED 3~2769}
A character number must be between 0 and 255.
I changed this one to zero.
! Bad math code (32768).
<to be read again>
\def
l.26 ...opmode\lccode256-0\mathchardef\a="8000\def
\a{ SCALED 3~2769}
A numeric math code must be between 0 and 32767.
I changed this one to zero.
! Illegal magnification has been changed to 1000 (32769).
<to be read again>
\skewchar
l.28 \skewchar
\rip=`B \countdef\countz % \countz will be \count0
The magnification ratio must be between 1 and 32768.
! Missing number, treated as zero.
<to be read again>
\def
l.29 \def
\on{1} \toksdef\tokens=256 \show\errorstopmode
A number should have been here; I inserted `0'.
(If you can't figure out why I needed to see a number,
look up `weird error' in the index to The TeXbook.)
! Bad register code (256).
l.29 \def\on{1} \toksdef\tokens=256
\show\errorstopmode
A register number must be between 0 and 255.
I changed this one to zero.
> \errorstopmode=\errorstopmode.
l.29 ...1} \toksdef\tokens=256 \show\errorstopmode
> \rip .
<recently read> \font
l.30 \showthe\font
\showthe\pageshrink \showthe\pagegoal
> 0.0pt.
l.30 \showthe\font \showthe\pageshrink
\showthe\pagegoal
> 16383.99998pt.
l.30 ...font \showthe\pageshrink \showthe\pagegoal
! Illegal unit of measure (replaced by filll).
l.32 ... = 10pt plUs5fil\ifdim\hsize<\hsize\fi lll
minus 0 fill
I dddon't go any higher than filll.
{\plainoutput }\one \csname on line 60
! You can't use `\badness' in vertical mode.
l.61 ...henpenalty 88 \exhyphenpenalty 89 \badness
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn't ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! Patterns can be loaded only by INITEX.
<recently read> \patterns
l.73 ...}\skipdef\\8\language\?\\.01014pt\patterns
! Patterns can be loaded only by INITEX.
<recently read> \patterns
l.74 ...}\emergencystretch9pt\language255\patterns
{\the\\} % \patterns{.0101...
! Patterns can be loaded only by INITEX.
<recently read> \patterns
l.75 {\language256\patterns
{0111 \?50AA1b3 *1AcA. bb bb1 0B2B0 b1c}} % *==...
Missing character: There is no 1 in font trip!
Missing character: There is no 1 in font trip!
Missing character: There is no 7 in font trip!
Missing character: There is no 1 in font trip!
Missing character: There is no 1 in font trip!
Missing character: There is no 1 in font trip!
Missing character: There is no Z in font trip!
Missing character: There is no 1 in font trip!
Missing character: There is no p in font trip!
Missing character: There is no t in font trip!
Missing character: There is no s in font trip!
! Patterns can be loaded only by INITEX.
l.78 1Z1pts\patterns
{q9q} -\0qq \showlists{\language\?\noboundary111}%
Missing character: There is no q in font trip!
Missing character: There is no q in font trip!
### horizontal mode entered at line 77 (hyphenmin 2,63)
\hbox(0.0+0.0)x20.0
\glue -9.0
\setlanguage255 (hyphenmin 2,63)
\rip A
\setlanguage98 (hyphenmin 2,1)
\glue 4.0 plus 1.99799 minus 1.00099
\glue 4.0 plus 2.0 minus 1.0
\setlanguage255 (hyphenmin 2,1)
\glue 4.0 plus 2.0 minus 1.0
\rip - (ligature -^^@)
\glue 4.0 plus 2.0 minus 1.0
spacefactor 1000, current language 255
### internal vertical mode entered at line 77
prevdepth ignored
### internal vertical mode entered at line 77
\glue(\tabskip) 0.0
prevdepth 0.0
### restricted horizontal mode entered at line 76
spacefactor 1000
### restricted horizontal mode entered at line 76
spacefactor 1000
### vertical mode entered at line 0
prevdepth ignored
! OK.
l.78 1Z1pts\patterns{q9q} -\0qq \showlists
{\language\?\noboundary111}%
Missing character: There is no 1 in font trip!
Missing character: There is no 1 in font trip!
Missing character: There is no 1 in font trip!
[] []\rip A[] [] -^^@ []
@\par via @@0 b=0 p=-10000 d=100
@@1: line 1.2- t=100 -> @@0
@emergencypass
[] []\rip A[] [] -^^@ []
@\par via @@0 b=0 p=-10000 d=*
@@1: line 1.2- t=0 -> @@0
! Patterns can be loaded only by INITEX.
l.79 \hyphenchar\rip=`-\cr}}\patterns
{toolate}\showbox0}
> \box0=
\hbox(8.0+0.0)x469.75499
.\vbox(8.0+0.0)x469.75499
..\glue(\tabskip) 0.0
..\vbox(8.0+0.0)x469.75499
...\hbox(7.0+1.0)x469.75499, glue set 445.75499fil
....\hbox(0.0+0.0)x20.0
....\glue -9.0
....\setlanguage255 (hyphenmin 2,63)
....\rip A
....\setlanguage98 (hyphenmin 2,1)
....\glue 4.0 plus 1.99799 minus 1.00099
....\glue 4.0 plus 2.0 minus 1.0
....\setlanguage255 (hyphenmin 2,1)
....\glue 4.0 plus 2.0 minus 1.0
....\rip - (ligature -^^@)
....\glue 4.0 plus 2.0 minus 1.0
....\setlanguage98 (hyphenmin 2,1)
....\penalty 10000
....\glue(\parfillskip) 0.0 plus 1.0fil
....\glue(\rightskip) 0.0
..\glue(\tabskip) 0.0
! OK.
<to be read again>
}
l.79 ...ar\rip=`-\cr}}\patterns{toolate}\showbox0}
)
(\dump is performed only by INITEX)
Here is how much of TeX's memory you used:
27 strings out of 8040
136 string characters out of 72321
6091 words of memory out of 262141
939 multiletter control sequences out of 9500
15334 words of font info for 53 fonts, out of 72000 for 255
15 hyphenation exceptions out of 607
13i,4n,2p,95b,37s stack positions out of 300i,40n,60p,3000b,4000s
No pages of output.
*******************************************************************************
* End output form trip.log ****************************************************
*******************************************************************************
Please respond by email to:
cavanaugh@lees.cogsci.uiuc.edu
Thanks.
John Cavanaugh