dsmith@applga.aa.cad.slb.com (J. Daniel Smith) (06/12/91)
Running the TRIP test, I get several lines that are very similar; the
only difference being the elipses at the end. The master file
contains the elipses, the generated file does not. Is this behavior
OK? Below is a small excerpt from the TRIP.LOG files.
If it makes any difference I'm using web2c-3.14 on HP/PA-RISC 700.
master trip.log
---------------
l.94 \openout-'78
terminal \openout10=tr\romannumeral1 \gobble...
generated trip.log
------------------
l.94 \openout-'78
terminal \openout10=tr\romannumeral1 \gobble\newcs pos
Thanks,
Dan
--
===========================================================================
J. Daniel Smith Internet: dsmith@applga.aa.cad.slb.com
Schlumberger CAD/CAM BITNET: smithdan@msuegr
Ann Arbor, Michigan Usenet: uunet!sharkey!applga!dsmith