kaser@ee.rochester.edu (Bob Kaser) (02/21/90)
I have a SUN 3/60 with a Micropolus 1355, 141 M, disk drive attached to the SCSI bus. I also have a Micropolus 1325,71 M,disk that I would like to connect to the 1355's SCSI out port. The Micropolus 1325 has an Adaptec(SP) controller. When we originally purchased this drive we recieved no documentation on it. What I need to know is: 1) How do I change the SCSI address to 'sd2' on the Adaptec controller. 2) Along with this is, which jumper block do I change since I don't have any doc's on the drive. Thanks to all in advance. Please email the results directly to me. ************************************************************************* Why did the Lord give us so much {) kaser@ee.rochester.edu quickness of movement unless it //\\ {ames,cmcl2,columbia,cornell, was to avoid responsibility with? ///\\\ garp,harvard,ll-xn,rutgers}! /\ rochester!ur-valhalla!kaser