src@scuzzy.uucp (Source Admin) (05/28/90)
i have a 386 running unix with adaptec 1540a host adapter. connected to it are a wren v, a quantum pro80s and a seagate ST296N hard disk. when i use the adaptec scsi utilities i can configure the control pages of the drives, but many parameters don't mean anything to me, and i'm not going to try it out what they mean. the question is: where do i get DETAILED information about those parameters ? i have the ansi scsi draft, and it tells you a lot, but nothing about those parameters, although most seem to be rather generic like the read/write error recovery control page. sure, there are custom control pages like the one for the quantum cache, but i thought those standard parameters would be in the standard paper... any pointers would be appreciated ! -- Heiko Blume blume@scuzzy.UUCP FAX (+49 30) 882 50 65 Kottbusser Damm 28 blume@netmbx.UUCP VOICE (+49 30) 691 88 93 D-1000 Berlin 61 TELEX 184174 intro d