robert@towers.UUCP (Robert Hoquim) (08/07/90)
als@bohra.cpg.oz (Anthony Shipman) writes: >I have noticed some odd behavior with a Wangtek 5150ES. The configuration is > AHA1542B controller > XT4380S Maxtor disk > 5150ES >The format program in the ROM on the 1542B lists all of the SCSI IDs >found. When only the disk drive is connected it just lists the drive as >ID 0. When the tape is connected it lists the disk as ID 0 and the tape >as all the IDs 1-7. This is not normal, I would check the ID of the Wangtek. What is the results if you have just the Wangtek connected? I would bet 0... -- Robert Hoquim Small Systems Specialists (317)-255-6807 8500 N. Meridian ..!nstar!towers!robert Indianapolis, IN. 46260