[comp.periphs.scsi] Maxtor XT-3280 and SUN-3/50

doleh@math-cs.kent.edu (Yaser K. Doleh) (09/25/90)

I am looking for a manual for a Maxtor XT-3280. If you have the manual
and willing to share the jumper info for the drive, please respond.

I am trying to use the drive above for a SUN-3/50 without any success. 
Please send any information that might help me.

Thank you
-------------------------------------------------
Yaser Doleh   <doleh@mcs.kent.edu>
Department Of Mathematics & Computer Science
Kent State University
Kent - OH 44242

ardai@sol.bu.edu (Michael Ardai) (09/26/90)

In article <1990Sep25.030231.14354@mcs.kent.edu> doleh@math-cs.kent.edu (Yaser K. Doleh) writes:
-I am looking for a manual for a Maxtor XT-3280. If you have the manual
-and willing to share the jumper info for the drive, please respond.
-
-I am trying to use the drive above for a SUN-3/50 without any success. 

I have never tried one of them on a Sun, but I have one running nicely
on my PC.

Test jumpers (leave on): JP21, JP43, JP41, J91-J94
JP42: Install for write protect
JP44: Install for spin up on power on
JP83: ID0  JP84: ID1  JP85: ID2  Install for 1, remove for 0
JP86: Parity enable
JP87: Power-up delay, 13 seconds * SCSI ID
JP82: Host supplies terminator power
JP81: Drive supplies terminator power

J2: Pin 1, LED Anode.  Pin 2, LED Cathode,  Pin 4, Write protect,  Pin 5, GND

Let me know if you get it working.
/mike
\|/ Michael L. Ardai     ardai@bu-pub.bu.edu   
--- ---------------------------------------------------------------
/|\ ...!sun!teda!ardai (preferred)