mikes@iuvax.cs.indiana.edu (Michael Squires) (10/16/90)
I'm trying to run an ESDI primary (Miniscribe 9780E) with the WD1007VSE2 controller (default setup) with a Tandy/Adaptec 1540 SCSI controller as a secondary controller to run an Archive Viper 2150S tape drive. The two conflict, but the causes are not obvious (to me). SCO indicates in the release notes that the setup has worked but gives no specific information about settings. If anyone has gotten these two items to work together, I'd be interested. I won't even talk about the Orchid ProDesigner II VGA board... This hardware is going into the replacement public access archive system, "sir-alan", soon to be "sir-alan.cica.indiana.edu". -- Mike Squires (mikes@iuvax.cs.indiana.edu) 812 855 3974 (w) 812 333 6564 (h) mikes@iuvax.cs.indiana.edu 546 N Park Ridge Rd., Bloomington, IN 47408 Under construction: mikes@sir-alan@cica.indiana.edu