neese@adaptx1.UUCP (01/04/91)
>/* ---------- "Quantum Prodrive 80 S jumper settin" ---------- */ > >I would like to know the jumper setting for a Quantum Prodrive 80 S. >I got this drive out of a used system but without manual. Besides the SCSI >ID jumpers, there are three more labelled: SS, EP and WS. >Does anybody knows their meaning ? The SS jumper stands for Self-Seek. This is a self test jumper option and is not intended for normal use. Default - Jumper off (Disabled) The EP jumper stands for Enable Parity. With this jumper installed the drive controller will check and generate parity on the SCSI data bus. Default - Jumper on (Enabled) The WS jumper stands for Wait Spin. With this jumoer installed the drive will wait for the spin-up/lod SCSI command before spinning up. Default - Jumoper off (Disabled). Roy Neese Adaptec Senior SCSI Applications Engineer UUCP @ neese@adaptex uunet!cs.utexas.edu!utacfd! {nominil,merch,cpe}!adaptex!neese uunet!mlite!adaptex!neese