csmoko@earth.nswc.navy.mil (Chuck Smoko - E41) (04/10/90)
Does anyone know where 50 PIN DB50P (PIN) Ribon cable connectors can be purchased? I can get the ones for the crimp pins just about anywhere. I was looking to make my own SUN scsi cables. cas __ __ () / ) / /) / ) /\ / / /_ __. __ // _ _ /--/ / ) ____ ____/_ __ (__/ / /_(_(_/ (_(/_(<_/_)_ / ( o /__/__/) ) )_(_) / <_(_)
feustel@well.sf.ca.us (David Alan Feustel) (04/12/90)
Try Digikey 800-344-4539.
--
Phone: (home) 219-482-9631
E-mail: feustel@well.sf.ca.us {ucbvax,apple,hplabs,pacbell}!well!feustel
USMAIL: Dave Feustel, 1930 Curdes Ave, Fort Wayne, IN 46805jlohmeye@entec.Wichita.NCR.COM (John Lohmeyer) (05/16/90)
In article <3250002@hpcpbla.HP.COM> kev@hpcpbla.HP.COM (Kevin Jones) writes: > >For SINGLE ENDED SCSI (as seen on most workstations): > >The maximum cable length must not exceed 6 m. >The maximum stub length must not exceed 10 cm. > >SCSI doesn't specify a minimum separation between devices. But SCSI-2 does (and SCSI-1 should have): "IMPLEMENTORS NOTE: Stub clustering should be avoided. Stubs should be spaced at least 0.3 meters apart." -- John Lohmeyer J.Lohmeyer@Wichita.NCR.COM NCR Corp. uunet!ncrlnk!ncrwic!entec!jlohmeye 3718 N. Rock Rd. Voice: 316-636-8703 Wichita, KS 67226 SCSI BBS 316-636-8700 300/1200/2400 24 hours
todd@toolz.UUCP (Todd Merriman) (01/20/91)
Is there anyplace to mail-order SCSI cables made-up? ******************************************************************************* * Todd Merriman - Software Toolz, Inc. * Maintainer of the * * 8030 Pooles Mill Dr., Ball Ground, GA 30107-9610 * Software * * todd@toolz.UUCP, (...emory!stiatl!slammer!toolz!todd) * Entreprenuer's * * V-mail (800) 869-3878, (404) 889-8264 * mailing list * *******************************************************************************