cm@jet.uucp (colin manning) (03/26/91)
Does anyone have experience using the above drive ? Any problems ? If anyone has used it with the Adaptec EISA SCSI controller (1740), especially under ISC unix, how fast is it ? -- - Colin Manning, cm%jet.uucp@ukc.ac.uk (world) OR cm@jet.uucp (UK only) ------------------------------ Disclaimer: Please note that the above is a personal view and should not be construed as an official comment from the JET project.
harry@demon.co.uk (Harry Broomhall) (03/29/91)
In article <1991Mar26.080805.12284@jet.uucp> cm@jet.uucp (colin manning) writes: >Does anyone have experience using the above drive ? Any problems ? > No problems at all - a nice drive. I am using it on an old Intel board as a PC drive, with an Adaptec AHA-1542B controller. It seems very fast, but I am sure that other things on my system are limiting it's speed, not the least that the main board is only a 16MHz unit! Regards, Harry.
neese@adaptx1.UUCP (03/31/91)
>/* ---------- "Fujitsu 1.2Gb drive" ---------- */ >Does anyone have experience using the above drive ? Any problems ? > >If anyone has used it with the Adaptec EISA SCSI controller (1740), >especially under ISC unix, how fast is it ? As a matter of fact, I have the exact setup you described running on a HP Vectra 486 EISA system. Works fine, although the CDC/Imprimis/Seagate Wren VII SCSI-2 drive is faster. Fast is a very subjective term under UNIX, but between these two drives, I haven't found a faster combination. Roy Neese Adaptec Senior SCSI Applications Engineer UUCP @ neese@adaptex uunet!cs.utexas.edu!utacfd!merch!adaptex!neese