pardue@tscs.uucp (Steven Pardue) (05/18/91)
I know that I am tempting fate but what the hell.. right. I currently have a Adaptec AHA-1540A SCSI controller that I hope to use with a Fujisu or Micropolis 600 plus megabyte SCSI disk drive... and I am also looking in to the Pioneer DRM-600 six disk changer on the same SCSI disk controller. Now, if the above will work correctly under DOS 3.31 or greater.. at some future date I would like to add a 150 MB SCSI tape drive to the system. Any ideas? -- ------------------------------------------------------------------------------ R. Steven Pardue - Total Support Computer Systems - Tampa - (813) 876-5990 UUCP: pardue@tscs FAX: (813) 871-2783
neese@adaptx1.UUCP (05/24/91)
>/* ---------- "Help w/ AHA-1540a and DRM-600" ---------- */ > >I know that I am tempting fate but what the hell.. right. > >I currently have a Adaptec AHA-1540A SCSI controller that I hope to use >with a Fujisu or Micropolis 600 plus megabyte SCSI disk drive... >and I am also looking in to the Pioneer DRM-600 six disk changer on the >same SCSI disk controller. > >Now, if the above will work correctly under DOS 3.31 or greater.. >at some future date I would like to add a 150 MB SCSI tape drive to >the system. The disk changer will require a device driver to support the commands for this type of device. Under DOS, you could do an ASPI device module easy enough, that would allow support of this deivce. There are already many tape modules available, so tape is no problem. Roy Neese Adaptec Senior SCSI Applications Engineer UUCP @ neese@adaptex uunet!cs.utexas.edu!utacfd!merch!adaptex!neese