neese@adaptx1.UUCP (06/20/91)
>/* ---------- "DOS 5: Problem with EMM386.EXE and" ---------- */ >Installing DOS 5 on a machine with a 1542B SCSI controller, >I have a problem with EMM386.EXE. It doesnt work. System >crashes as soon as you try to put something in a UMB, such >as loading RAMDRIVE using devicehigh. Similar problem also >seen with a 1740 EISA SCSI. > >I have tried mapping out various bits of high memory, but >to no effect. Devices are configured at the default 1542 BIOS >addresses. Have you loaded the ASPI4DOS driver? Does EMM386.EXE support the VDS (INT4B) spec? If it does you won't need a local buffer, but you will need ASPI4DOS loaded as it can deal with memory managers that do/don't support the VDS spec. Roy Neese Adaptec Senior SCSI Applications Engineer UUCP @ neese@adaptex uunet!cs.utexas.edu!utacfd!merch!adaptex!neese