PMW1@PSUVM.PSU.EDU (Peter Weiss) (02/01/90)
In article <IBM-MAIN%90020112541812@EB0UB011>, Suleyman Nazif KUTLU <SYSADM4@TREARN.BITNET> says: > > We have an IBM 4341-2 with a 3705-2 Communication controller. We > installed SSP V3.2, VTAM V3.1 and NCP V3.1. When we try to load NCP > onto 3705, we get the following errors. How can we manage to load NCP > onto 3705 without errors? Any help would be appreciated. > -Suleyman Kutlu If *memory* serves, the last release of NCP that worked with a 3705 was NCP V2. Either that, or you're out of memory (e.g. more standard read: non-sysgenable, options). ------- Peter M. Weiss | (this line intentionally left blank) 31 Shields Bldg (the AIS people) | Don't FAX me, I'll FAX you! University Park, PA 16802 | Disclaimer :1 * applies herein
RJD@UNC.BITNET (919 Joel Dunn 966-5837) (02/01/90)
I got a very similar error when I tried to move from NCP 4.2.0 to NCP 4.3.1 on my 3725. It turned out that the problem was not enough memory in the 3725. I had a 768K 3725 and the 4.2.0 NCP took about 512K, but the 4.3.1 NCP took nearly 1 meg. There is a tech bulletin that outlines the memory considerations for upgrades at these release levels, but I can't put my hands on it right now. Try removing some comm lines from your NCP source deck and see if you can get anything to load, even if it doesn't have all your terminals defined. At least you can then know that your gen process is OK. Joel Dunn Mgr, Communications UNC-Chapel Hill Admin Data Processing > We have an IBM 4341-2 with a 3705-2 Communication controller. We > installed SSP V3.2, VTAM V3.1 and NCP V3.1. When we try to load NCP > onto 3705, we get the following errors. How can we manage to load NCP > onto 3705 without errors? Any help would be appreciated. > -Suleyman Kutlu > lu . . . > IST273I LOAD OF NCP17 FAILED - PERMANENT I/O ERROR . . .
SYSADM4@TREARN.BITNET (Suleyman Nazif KUTLU) (02/01/90)
We have an IBM 4341-2 with a 3705-2 Communication controller. We
installed SSP V3.2, VTAM V3.1 and NCP V3.1. When we try to load NCP
onto 3705, we get the following errors. How can we manage to load NCP
onto 3705 without errors? Any help would be appreciated.
-Suleyman Kutlu
vtam v net,act,id=ncp17,load=yes
Ready;
IST097I VARY ACCEPTED
IST461I ACTIVATE FOR U/RNAME ENTRY ID = 420-S STARTED
IST897I LOAD OF NCP17 STARTED
IST273I LOAD OF NCP17 FAILED - PERMANENT I/O ERROR
IST380I ERROR FOR ID = NCP17 - REQUEST: AM REQLOAD, SENSE: 081C0020
IST487I VARY INACT FOR ID = 420-S SCHEDULED BY VARY INACT
IST105I 420-S NODE NOW INACTIVE
IST487I VARY INACT FOR ID = 420-L SCHEDULED BY VARY INACT
IST105I 420-L NODE NOW INACTIVE
IST105I NCP17 NODE NOW INACTIVE