jwilliam@esunix.UUCP (Jerry Williams) (02/20/90)
I have heard that you can add chips to sockets on the 2091 and get 2Meg
of memory on it. What I would like to know is if this is really true.
I would like to know what chips you need. Like a couple of part numbers
and how fast does it need to be. I would also like to know what other
memory expansion boards use the same type of chips. I would think that
if you had a 8Meg board that you would want to take the chips off of the
2091 and put them on the 8Meg board to go past 2Meg. What is the
difference between the Microbotics 8Up board & the 2058 besides price?
I know that there are 2 versions of the 8Up board.
Thanks for any help!
--
Jerry Williams @ Evans & Sutherland 560 Arapeen Drive, SLC, Utah 84108
UUCP Addresses: {ihnp4,ucbvax,allegra,decvax}!decwrl!esunix!jwilliam
ihnp4!utah-cs!esunix!jwilliam usna!esunix!jwilliam
esunix!jwilliam@cs.utah.edu (Internet)