lgreen@pnet01.cts.com (Lawrence Greenwald) (03/06/90)
I'm having some problems with my Supra WordSync/Conner Peripherals CP-3100
(100 meg drive).
1) The board expects you to mount the drive with the holes thru the *SIDE* of
the drive (instead of the *BOTTOM* as on say, the GVP HardCard). The Conner
drive has three (3) holes alomng the side that don't match up to the holes
in the WordSync brackets. Has anybody solved this? My drive is hanging
somewhat precariously between the two brackets.
2) I've run SupraFormat and am loading the Workbench software to the drive.
When I get to SupraAutoInstall, it hangs and I can't autoboot the drive. If
I put the jumper to the autoboot "YES" position, when I try all I get is
the dark grey screen. If it's in "NO", I can boot from the floppy. I *HAVE*
read the manual, but I am lost on this.
Your help is most appreciated!!!!
Larry Greenwald
UUCP: {hplabs!hp-sdd sdcsvax nosc}!crash!pnet01!lgreen
ARPA: crash!pnet01!lgreen@nosc.mil
INET: lgreen@pnet01.cts.com
SNAIL:4545 Collwood Blvd, #52 San Diego, CA 92115
"I'm looking over a three-leaf clover that I overlooked be-three!" -Bugs Bunny