lhummel@urbana.mcd.mot.com (Lionel Hummel) (03/10/90)
I am trying to diagnose a problem with my A1000 where the machine usually locks up when running binddrivers at power-up. Configuration: Xetec FastTrack SCSI ASDG Mini-rack w/2MB Kick/WB 1.3 Back in the early days, I remember discussions of the occasional need to ground pins or even replace PALs on the motherboard. I'd like to begin by eliminating this as the problem. Could any of you who are into A1000 hardware send me information on known problems and solutions associated with lock-ups during binddrivers and/or information on PAL problems? I would also appreciate info on what PAL pins need to be grounded or what equations should be used if I find myself needing to burn replacements. -- < Lionel ----------- Lionel D. Hummel, Software Engineer [H] (217) 344-8713 Motorola Microcomputer Division, Urbana Design Center [W] (217) 384-8511 lhummel@urbana.mcd.mot.com uiucuxc!udc!lhummel uiucdcs!large!lionel