srm@hardees.rutgers.edu (Scott R. Myers) (03/15/90)
I have recently purchased a used Amiga 1000 w/Genlock. I have a few questions.
I have no documentation for the equipment or software for the Genlock. My
questions are primarily directed to the Genlock. I purchased the system so I
can do special effects stuff with video input. I need a copy of any software
and documentation that comes with the Genlock. If anyone could send me this
(of course if it isn't legal to do so I would understand). Also if this is not
a possibility can some one direct me to a source at Commodore that I can
purchase this information or even some third party stuff. My immediate need
is to aquire at least a simple program to test the genlock out to be sure it's
really operational. If someone can tell me where to find either a cheap
package or something in PD or Shareware I would appreciate it. Last but not
least on the list is versions of KickStart & WorkBench. Apparently the person
I bought this system from had previously sold an Amiga 500 to someone else.
Well to make a long story short the versions of KS & WB that I have are version
1.3 for the A500/A2000. Should that make any difference on my A1000. Any
suggestions to the above would be greatly appreciated. Oh one more last
thought. I need the pinouts for a RS232 cable (25 to 25 pin) so I can get on-
line. Thanx again.
--
Scott R. Myers
Snail: 580 Jefferson 5A Phone: (201)289-7304 (Home)
Elizabeth, NJ 07201
Arpa: srm@topaz.rutgers.edu Uucp: ..!topaz!srm
"... No matter where you go, there you are ..."
"... Ha! I kill me ..."
>>>2 Hype<<<