schur@venera.isi.edu (Sean Schur) (05/29/90)
I am aware that the Amiga 3000 has a built in image enhancer which serves the same purpose as the Flicker Fixer card. I am also aware that to use the Flicker Fixer card with a genlock you need an additional piece of hardware. My question is this: Is the additional hardware needed with Flicker Fixer because of a quirk in that card or a problem multi-syncing with a genlock? So basically I am asking if I will need an add-on with the 3000 image enhancer to use my genlock? Is/Will such an add on be available? ============================================================================== \ / \ \ / / Sean Schur \ \ / / \ \/ / USENET: schur@isi.edu \ /a\mpyr/ Compuserve: 70731,1102 \/ \ / ideo Plink: OSS259 \/ ==============================================================================
hood@cbmvax.commodore.com (Scott Hood) (05/30/90)
In article <13665@venera.isi.edu> schur@venera.isi.edu (Sean Schur) writes: >I am aware that the Amiga 3000 has a built in image enhancer which serves >the same purpose as the Flicker Fixer card. I am also aware that to use >the Flicker Fixer card with a genlock you need an additional piece of hardware. > >My question is this: Is the additional hardware needed with Flicker Fixer >because of a quirk in that card or a problem multi-syncing with a genlock? >So basically I am asking if I will need an add-on with the 3000 image >enhancer to use my genlock? Is/Will such an add on be available? > >============================================================================== > > \ / > \ \ / / >Sean Schur \ \ / / > \ \/ / >USENET: schur@isi.edu \ /a\mpyr/ >Compuserve: 70731,1102 \/ \ / ideo >Plink: OSS259 \/ > >============================================================================== The A3000 Display Enhancer is somewhat compatible with internal and external genlocks. Not only will the Display Enhancer not interfere with the operation of the genlock but the Display Enhancer will continue to de-interlace/scan-double the Amiga's RGB display so that simultaneous output of 31Khz Amiga video and 15Khz NTSC/PAL overlay video and graphics from the genlock can occur. For more information, the "Introducing the A3000" manual, Appendix C is very helpfull. Scott Hood CBM Engineer