djh@dragon.metaphor.com (Dallas J. Hodgson) (06/15/90)
Anyone who currently has a Syncro-Express II for the A-500 can easily jumper their board for the A2000/3000. The jumper is from pin 20 on the male connector (SEL3B) to pin 9 (SEL2B) on the female connector. If you look carefully, you will find a couple of plated-thru holes that will do the job nicely. There is a similar, but slightly more complicated, fix available for the Syncro-Express I. This information came directly via Fax from Coast-To-Coast Technologies. +----------------------------------------------------------------------------+ | Dallas J. Hodgson | "This here's the wattle, | | Metaphor Computer Systems | It's the emblem of our land. | | Mountain View, Ca. | You can put it in a bottle, | | USENET : djh@metaphor.com | You can hold it in your hand." | +============================================================================+ | "The views I express are my own, and not necessarily those of my employer" | +----------------------------------------------------------------------------+