n350bq@tamuts.tamu.edu (Duane Fields) (08/30/90)
I just added an internal 3.5 drive to my 3000, it was an external MASTER 3A1, but I fixed that! Anyhow, if anyone else is planning to add an internal drive, please note a problem that stumped me for awhile, there is a jumper on the mother-board marked DF1:/No DF1: that must be changed to recognize the drive. This is, as far as I can tell not documented in the manual anywhere. Duane Fields
jms@tardis.Tymnet.COM (Joe Smith) (09/19/90)
In article <7817@helios.TAMU.EDU> n350bq@tamuts.tamu.edu (Duane Fields) writes:
: there is a jumper on the mother-board marked DF1:/No DF1: that must be changed
:to recognize the drive.
:This is, as far as I can tell not documented in the manual anywhere.
I found J351 documented in the fine print on page E-1 of the small A3000 manual.
--
Joe Smith (408)922-6220 | SMTP: jms@tardis.tymnet.com or jms@gemini.tymnet.com
BT Tymnet Tech Services | UUCP: ...!{ames,pyramid}!oliveb!tymix!tardis!jms
PO Box 49019, MS-C41 | BIX: smithjoe | 12 PDP-10s still running! "POPJ P,"
San Jose, CA 95161-9019 | humorous dislaimer: "My Amiga speaks for me."