es1@cunixb.cc.columbia.edu (Ethan Solomita) (10/24/90)
HELP! I apparently turned on my 3000 while it was a bit wet. The VGA output is doing the wierdest things to my NEC 3D, while the RGB output is fine, however I want my flicker-fixer! I tried flicking the flicker-fixer's switch to know avail. The monitor is unable to sync with the signal, and in fact will often switch scan-rates. The picture is totally garbled and warped. As things change on the output, the way in which things are messed up changes and the syncing will change. I don't trust my dealer to figure this out easily, so I was hoping for some help. What is it likely to be? Also, is my warranty void because it rained? Thanks, -- Ethan Ethan Solomita: es1@cunixb.cc.columbia.edu GorbachevAwards++; free (SovietUnion); IndependentRepublics += 15;
es1@cunixb.cc.columbia.edu (Ethan Solomita) (10/24/90)
One other thing. The VGA port goes in and out of working. Currently, it is working. The machine has been on for a while with the monitor on the RGB port. When I first had the problems, it got worse as time went on. The image I'm sure will begin to break up soon. -- Ethan Ethan Solomita: es1@cunixb.cc.columbia.edu GorbachevAwards++; free (SovietUnion); IndependentRepublics += 15;