brians@hpcljms.HP.COM (Brian Sullivan) (10/25/90)
I have installed a SyQuest 5 1/4 drive on my Amiga 2000HD. I am still having a few problems, with the SCSI controller though. I have a A2091 and have installed the SyQuest at SCSU address 0, and a Quantum 40MB is a address 6. What happens is that after writing several files to the SyQuest the controller locks up. The drive access light on the SyQuest stays on and the Disk light on the 2000 stays on. No further SCSI activity is possible. This behavior is quite frustrating and it doesn't happen while accessing the Quantum. I have disabled reselction for the SyQuest and I may have disabled it for the Quantum, but I am not sure how to check for this. The HD-Toolbox program doesn't seem to read the existing configuration at all it just lets you modify or create a new one and then re-initialize the disk with the screwy partition defaults. Is it possible to change this field without destroy all the data on the disk??!#!? I am going to try removing the Quantum from the daisy chain and see if the SyQuest will work on it's own. If not I will probably contact SyQuest to see if they can tell me what the problem is. -- Brian -- email: brians@hpclove.cup.hp.com phone: work (408)447-7352 home (408)379-7260