[comp.sys.amiga.hardware] Connecting several expansions to an amiga 1000.

a665@mindlink.UUCP (Anthon Pang) (11/01/90)

ravi@techunix.BITNET writes:
>         I'm looking for help reguarding the options of expanding
> an Amiga (model 1000). I own an Amiga 1000 with Sidecar and would like
> to add on a memory board, the board that was offered to me was one meg
> board from C-ltd in a very reasnable price, the board has a pass through
> port but it is female type (the SideCar has the same type of port, which
> does not allow to connect both expansions side by side).
> 
> my questions are:
> 
> 1. Is there any way to adjust the ports and by this connecting
> both expantions to my Amiga?
> 
> 2. As I'm not a hardware expert, I would appreciate comments by people who
> use SideCar expantion on the issue of adding memory boards.
> 
> 3. As I recall from the time the Sidecar was announced, there were roomers
> that commodore would release a memory expantion that would fit inside the
> Sidecar and would support additional 2 meg, is there any port build inside
> my sidecar that I might adjust for the C-ltd memory board.

1) Not that I know of...and probably none that will work reliably.
2) I couldn't use my Startboard II with my Sidecar which has a passthru, but it
does work with an Insider.  Maybe replacing the daughterboard (WCS), with a ROM
mod, would make it stable enough to use the Starboard.  The C-Ltd wasn't
designed to buffer the bus, ie it doesn't pass the bus, so unless you only
occassionally use the Sidecar, you could consider switching between the 2 SOTS
units.
3) The memory expansion was never released.

ravi@techunix.BITNET (avi rozen) (11/01/90)

Dear net users,

        I'm looking for help reguarding the options of expanding
an Amiga (model 1000). I own an Amiga 1000 with Sidecar and would like
to add on a memory board, the board that was offered to me was one meg
board from C-ltd in a very reasnable price, the board has a pass through
port but it is female type (the SideCar has the same type of port, which
does not allow to connect both expansions side by side).

my questions are:

1. Is there any way to adjust the ports and by this connecting
both expantions to my Amiga?

2. As I'm not a hardware expert, I would appreciate comments by people who
use SideCar expantion on the issue of adding memory boards.

3. As I recall from the time the Sidecar was announced, there were roomers
that commodore would release a memory expantion that would fit inside the
Sidecar and would support additional 2 meg, is there any port build inside
my sidecar that I might adjust for the C-ltd memory board.

                Please Email your response to:                      ///
                        Avi Rozen (ravi@techunix.technion.ac.il).  ///
                                                               \\ ///
                                                                \X//