daniel.marksel@f416.n711.fido.oz.au (Daniel Marksel) (11/17/90)
Original to: mbdzm@rohvm1.bitnet Yes you can use a conventional IBM supply in this position. however, the Tick signal will have to be strapped. What it is, is a line frequency output from the power supply used to synchronise video. When you put the IBM supply in you will need to move jumper J300 on the Amiga Motherboard to position 2-3 (it is in position 1-2 by default) and it will work just fine. BTW the supply should be repairable..and you will fing that the fault can be traced back to a faulty Switching transister (A BU508A from memory...common garden variety silicon). Good Luck dan --- TMail v1.19 * Origin: K.K.K BBS - Killer Kenders of Krynn (3:711/416)