jdp@caleb.UUCP (Jim Pritchett) (01/04/91)
[] I want to move my internal SCSI drives to an external box. Currently, they are connected via the 50 pin rectangular connector on the A2090. The external connector is a 25 pin Mac (bleech) type connector. Can I simply make a cable that reroutes the pin numbers appropriately? Do I just make all the "ground" pins connect to the same ground? Also, what is TPWR on the external connector? Is this a supplied voltage to power the drive? Thanks, -- Jim Pritchett UUCP: texsun.central.sun.com!letni!rwsys!caleb!jdp or spudge.lonestar.org!caleb!jdp or letni.lonestar.org!dms3b1!caleb!jdp