[comp.sys.amiga.hardware] Digitizer plans

armhold@porthos.rutgers.edu (George Armhold) (01/13/91)

Hi,

Could someone please send me the latest plans for the home-brew Amiga
audio digitizer?  Are there any plans available for a stereo version?

Thanks,

-George
-- 
Internet: armhold@aramis.rutgers.edu
UUCP: {backbone}!rutgers!aramis.rutgers.edu!armhold
BITNET: armhold@PISCES.BITNET

davem@hp-lsd.COS.HP.COM (Dave K. Martin) (01/14/91)

This is probably not what you are looking for but why not check out the 
article on building a sound digitizer in Amazing Computing.  I don't rememeber
the issue number but I think it was in 89.  I can look it up if you like.

Anyway, the sound digitizer presented there has stereo capability, line and 
mike inputs, sampling rates up to 25k and works with any Amiga.  The author 
still offers pc boards for a professional assembly.  The first of these I 
built was done on a breadboard and worked just fine.  I built a second for 
a friend using the pc board.  In both cases, the digitizer worked just fine.
the chips were fairly cheap but a little hard to locate.  Total cost minus 
case worked out to about $90 for the pc version.

Hope this helps...