JKT100@psuvm.psu.edu (JKT) (02/04/91)
My system is an A2000 with an A2091; 2 megs of 256x4's on the 2091.
Until recently I thought if I ever wanted more RAM, I could just plug
any RAM expansion board into my 2000 and the RAM I had would autoconfig
with any RAM on that board.
Some folks have hinted, though, that this might not work; I didn't
totally understand what the problem might be, but they implied the RAM
might not be continuous or something.
So anyway, my question comes in two parts, as I do not quite know yet
what I want to do (and what I do might well depend on the answers to
these questions!):
A) If I decide I do not want to accelerate my Ami, and just want to
add 16-bit Fast RAM, what are my options? Can I indeed just plug it
in and go, or are there really problems? If there are problems, what
are they, and what can I use with my 2091's existing memory?
B) Should I decide I want to accelerate my 2000, I already know I
should get lotsa 32-bit memory on-board to go with it to take full
advantage of the '030. Question is, will this memory work in conjunction
with my 2091's memory, or do I have to lose the 16-bit RAM on it?
Any answers appreciated, by mail or posted here - your choice. :-)
Kurt
--
-----------------------------------------------------------------------
|| Kurt Tappe (215) 363-9485 || With. Without. And who'll ||
|| 184 W. Valley Hill Rd. || deny it's what the fighting's ||
|| Malvern, PA 19355-2214 || all about? - Pink Floyd ||
|| jkt100@psuvm.psu.edu --------------------------------------||
|| jkt100@psuvm.bitnet jkt100%psuvm.bitnet@psuvax1 QLink: KurtTappe ||
-----------------------------------------------------------------------