bobl@bobsbox.rent.com (Bob Lindabury) (02/11/91)
I'm not sure if this a hardware or software problem but I am having some difficulty printing from the Amiga to my LQ-510 printer. It seems that no matter what I do I keep getting double spaced lines of text. I am printing primarily from Excellence! 2.0 to this beast. No, I don't have LF after CR turned on on the printer. Any suggestions? Also, I am runing it from WB 2.02 if that is anything to worry about. I've also tried other WP's and gotten the same thing which indicates either a hardware or configuration problem. I can't find anything in prefs to fix the problem. Please send me e-mail as I am temporarily unable to get this feed. I hooked it up to my IBM AT and have had no problems. Thanks. -- Bob InterNet: bobl@bobsbox.rent.com | Raven Enterprises UUCP: ...rutgers!bobsbox!bobl | 25 Raven Avenue BitNet: got!me!on!this!one | Piscataway, NJ 08854 Home #: 908/560-7353 | 908/271-8878
gt1619a@prism.gatech.EDU (Net Runner Mark V) (02/12/91)
I have the same printer hooked up to my A3000 and have never had any problems at all with it. Then again, I'm not using Excellence either. You might want to check your preferences settings and such, or maybe the dips on the printer. I have noticed that the 2.0 preferences printing does seem to do a much better job with with graphics printing on my LQ than the 1.3.... ------------------------------------------------------------------------- James D. McIninch ------------------------------------------------------------------------- School of Applied Biology Georgia Institute of Technology, Box 31619 Atlanta, Georgia 30332 uucp: ...!{decvax,hplabs,ncar,purdue,rutgers}!gatech!prism!gt1619a Internet: gt1619a@prism.gatech.edu ************************************************************************** * The goal: to design CAD/CAM software and hardware for the creation * * of living things... * **************************************************************************