[comp.sys.amiga.hardware] Cheap flicker reduction for Amigas

bernie@DIALix.oz.au (Bernd Felsche) (02/17/91)

In <1991Feb12.015139.13945@marlin.jcu.edu.au> glmwc@marlin.jcu.edu.au (Matt Crowd) writes:

[... discussion about flicker not perceived on TV deleted ...]

>>You may occasionally see the effect in low-cost video productions,
>>when computer-generated graphics are displayed.  Sharp edges in the
>>colours, which have not be aliased, will flicker.

>You're right! I watched the weater last night and WeatherMap was done
>with an Amiga, YES there was flicker on the horizontal bars.

There you go.

At a meeting with other Amiga (ummm...) enthusiasts/developers we
discussed the problems of perceived flicker, witnessing the top 1/3
line flicker on an A3000.

One person mentioned that he had never noticed flicker on his TV 
until he had a proper antenna and tuned-in TV.  After that, flicker 
was quite evident.  An out-of-tune or poor signal effectively 
"smudges" the image.

One way to allieviate the flicker problem on the Amiga, is to blur 
or smudge the image, so that adjacent pixels can mix before they hit 
the eyes.  A possible (cheap) way of achieving this is to smear 
petroleum jelly (aka "Vaseline") on the monitor face.  This is likely 
to produce the desired interference patterns and flicker reduction.

We did not test this idea, but would be glad to hear from anybody
who's tried.

I must warn you that such a modification will probably void your 
warranty, unless the work is performed by an authorised C= service 
centre.

Are you listening, Scott Hood?  Is this a hardware modification
which C= could perform during manufacture?  Or is it something 
the dealer should do?  How about supplying a free jar of Vaseline
with every Amiga?



OK, I'll let you off the hook.  Note the cross-post to rec.humor.

-- 
 ________Bernd_Felsche__________bernie@DIALix.oz.au_____________
[ Phone: +61 9 419 2297		19 Coleman Road			]
[ TZ:	 UTC-8			Calista, Western Australia 6167	]