[comp.sys.amiga.hardware] Request info on MegaMidget Racer, please

echadez@isis.cs.du.edu (Edward Vincent Chadez) (02/16/91)

Greetings!
This is my first usenet mail message, so forgive me if I mess this
up.

I would like to know who (out there) is using the MegaMidget Racer
(manf'd by C.S.A.), and what their system configuration is
(A500/A2000/A1000, hard drives, MMR 32 bit memory, and so on).

Most importantly, I need to know what hard drives work with the MMR
under the '030.  I'm sure the Vault (by PP&S) won't work. Any others?

Thank you in advance for any information you may have.

--Edward Chadez

kellyw@telstr.UUCP (Kelly Wright) (02/19/91)

I have the CSA MMR, and operate it with a AD-SCSI SCSI controller from ICD
and a Quantum 105S HardDrive.  Also have 2 megs of 32 bit ram mounted on the
MMR.  System works great, very fast with very few crashes or problems.  In
fact, I run a mutli-line BBS from this system, 24 hours a day.  The support
from CSA is also very good (but doubt you will need it :-)).  Very nice piece
of hardware...

          sharkey.cc.umich.edu!wybbs!telstr!kellyw

Doug Kelly <KELLYDK@QUCDN.QueensU.CA> (02/25/91)

Sorry to post, but my mail bounced.

What type of memory does the MMR take, and what speed?

Doug Kelly
kellydk@qucdn.queensu.ca