jackf@pnet01.cts.com (Jack Fitchett) (04/05/91)
Just got a great deal on a bills boards exspansion chassis but I'm
having trouble getting it to work with An ICD SCSI + 2meg in it. If
I let it autoconfig **GURU**. If I inhibit it and try and access the
SCSI afterboot **GURU**. Seems to be at randon times and random GURU
nubers but always on first attemtp to talk to the card. Could be the Bill's
Boards as I have no other A2000 cards to try out on it. Any one been
there before???
jack
UUCP: {hplabs!hp-sdd ucsd nosc}!crash!pnet01!jackf
ARPA: crash!pnet01!jackf@nosc.mil
INET: jackf@pnet01.cts.comgoldstein@arrods.enet.dec.com (Steve Goldstein) (04/07/91)
In article <8406@crash.cts.com>, jackf@pnet01.cts.com (Jack Fitchett) writes... > > Just got a great deal on a bills boards exspansion chassis but I'm >having trouble getting it to work with An ICD SCSI + 2meg in it. If >I let it autoconfig **GURU**. If I inhibit it and try and access the >SCSI afterboot **GURU**. Seems to be at randon times and random GURU >nubers but always on first attemtp to talk to the card. Could be the Bill's >Boards as I have no other A2000 cards to try out on it. Any one been >there before??? > > jack > > >UUCP: {hplabs!hp-sdd ucsd nosc}!crash!pnet01!jackf >ARPA: crash!pnet01!jackf@nosc.mil >INET: jackf@pnet01.cts.com The Problem is probley timming...One of the biggest faults with the BILL Board was the fact that they had a pass-through system and this screwed the timming .. I have a MonAMI Jr. a three slot terminated adaptor on my A500 and in it I have a HardFrame and an 8-UP with 2-megs... I have NO problems withn this combination... /// Steve Goldstein /// Digital Equipment Co \\\/// England. \XX/ goldstein%arrods.dec@decwrl.dec.com