doc@brewing.cts.com (Mitchell M. Evans) (04/13/91)
Howdy! If you are using the Palomax hard drive kit, and the Adram package for the 500, you will need to do the following: 1) Switch address pins 54 & 56 on the 100 pin bus connector (Amiga side). 2) Edit devs:Hdparams to use EFFFE0 as controller one base address (modify for more controllers) 3) Re-run hdconfig3.0 and reboot. 4) It's fixed! This took me a couple of hours on the phone with Palomax support and rooting through the memory maps to figure out. Seems that both the Adram and the Palomax hardware was contending for the F7FFE0 range of memory. Enjoy! Mitch =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= = ...!crash!brewing!doc US MAIL: Mitch Evans = = or 12373 Calle Albara #5 = = doc@brewing.cts.com El Cajon, CA 92019 = = = = Baldrick, you wouldn't see a subtle plan if it painted itself purple and = = danced naked on top of a harpsichord singing "Subtle Plans Are Here = = Again". -- Black Adder = =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=