earl@motcid.UUCP (Brent R. Earl) (04/17/91)
My a2000, rev4.4 with micron technologies 2m, microbotics 8up sim with 3m (2 1m simm's and 4 256k simm's, and microbotics hardframe running some brand of 80 meg scsi hard drive. I have 512k chip, and 512k fast on the motherboard. Problems: On startup I see a green screen for a short time, then the black and gray and finally white before it goes into the workbench. During hard drive access the screen tends to jump (maybe power drain affecting something?) and after the initial clock load, the software clock never changes. I have attempted to remove all the memory boards one at a time, and try but all this still happens. Any suggestions? Reply to uunet!motcid!earl