Eric.Sanders@f210.n110.z1.FIDONET.ORG (Eric Sanders) (04/21/91)
AREA:UUCP_HRDWR
Hi Dave, I had a problem with my Fujitsu 90 meg drive and a Hardframe
controller. I found out it had to do with the jumper that controlled
whether it was in syncronous our asynchronous mode. I can't remember
exactly which was correct but I believe it had to be in asyncronous mode.
My spre sheet shows a string of jumpers with 11 pins called CNH-1. To
put it in asyncronous mode, pin 5&6 need to be jumpered (11 is nearest
the edge of the board, one towards the middle).
Hope this helps (1.2 Gig Geesh! Lucky Duck!)
--
----------------------------------------------------------------------------
AFIT Amiga Users BBS/UFGateway |Eric Sanders - via FidoNet node 1:110/300
1:110/300 Dayton, Ohio |UUCP: afitamy!210!Eric.Sanders
(513)-252-7681 |ARPA: Eric.Sanders@f210.n110.z1.FIDONET.ORG
----------------------------------------------------------------------------