dsg@cci632.cci.com (David Greenberg) (05/28/91)
I recently aquired an Archive 80 mb tape unit from a friend (he also has a cipher he is going to let me play with) but the Archive does not seem to work with my C.Ltd Kronos controller. He made me the correct cable, so my hard drive (80 mb seagate) is in the middle of the bus (no termination packs) and the tape drive at at the end. I plug the scsi cable into the tape drive and power up, and the light on the tape drive comes on and stays on...and my hard drive will not boot. If I power off the tape drive, the machine boots. I can then turn on the tape drive (light still stays on) then if I try to access my harddrve, I get a read error. I do not know which jumper setting is correct for the tape drive (drive select) the Hard Drive is Unit 0, and I don't know what the drive is.... I think the problem is that my controller is not set up properly, the documentation is very schetchy and I'm not sure Which unit the tape drive is! (Yes I'm pretty lost!) Also I'm having trouble setting up BTN tape handler.... Can anyone help???? Thanks, Dave