denny@pnet01.cts.com (Dennis Anderson) (06/16/91)
I have a friend who has the following equipment - A1000 , Starboard2 2 meg
expansion, Supra HD interface with a 63 meg HD. We cannot get 2.0 (ver 2.02)
to work with her HD. Using ZKick and the 2.02 file everyting loads in fine and
will boot up properly into 2.0 IF done from a floppy only. The problem is
after the boot we cannot get SUPRAMOUNT to work at all so her HD is not
available for use. We get 2 different error messages when SUPRAMOUNT is run,
one says SupraMount failed error code 10 and the other one says cannot find HD
partition please reformat HD and redefine where SYS is located. SORRY these
are not the exact error messages as I was helping this person over the phone.
Is anyone else using this combination of stuff and getting it to work? Is
anyone using this combination and NOT getting it to work? If ANYONE knows what
the trouble may be please reply as any help would be GREATLY apreciated.
P.S. This is NOT an autobooting HD. Thanks.
Dennis Anderson