ks37+@andrew.cmu.edu (Kurt Jurgen Schaefer) (06/28/91)
Does anyone know a cheap SCSI interface that would let my A1000 work with the 96Meg SCSI that was mentioned a little while ago on this board. (I think it was:: Subject: information on cheap 96Meg SCSI, 3'5) or some such. I think the offer was of limited duration, so any information would would be a big help. Thanks, Kurt J Schaefer.cs.undergrad.likes.amigas
dsg@cci632.cci.com (David Greenberg) (06/28/91)
The drive was a Maxtor 96 meg 3.5, 27 ms access time (SCSI). for $250 avail from IME Computers (Boston) 1-800-999-1911. The Sale ended last friday, but You still Might be able to get the drive at $250 (as I did on Monday)....It is Nice, It only formatted to 90 Meg on my HardFrame Though.... As for a Controller, How cheep do you want to go... I have a C.LTD Kronos for the 2000 for sale, Don't know if it will work on the 1000....$75 (It does not support SCSI Direct Protocol, so hooking a Tape Drive up to it (with BTN tape) will not work) Dave
manfred@edomdo.UUCP (Manfred Dolag) (06/29/91)
In article <gcOZIR200VI=E353B4@andrew.cmu.edu> ks37+@andrew.cmu.edu (Kurt Jurgen Schaefer) writes: >Does anyone know a cheap SCSI interface that would let my A1000 >work with the 96Meg SCSI that was mentioned a little while > Kurt J Schaefer.cs.undergrad.likes.amigas -- The cheapest compatible SCSI-Interface for the A1000 is the Commodore A590. Just turn it around 180 degrees (top side still up), plug it in and use it. Autoboot, C= compatible... - - - - Manfred Dolag, Edotronik GmbH (ECG018), Tel. +49 89 404093, FAX +49 89 402293 Path: ...!cbmvax!cbmehq!cbmger!edomdo!manfred