anders%autopsy.csd@sgi.com (Greg Anders) (07/03/90)
I recently purchased a Mission tonearm at a local high-end store`s yearly clearance. I comes without a cable and I am looking for a connector to fabricate one. I was wondering if anyone out there knows what type of connector I am looking for. The plug in the tonearm is recessed in the base, its a male connector with five pins arranged in the following pattern: X X X X X At first I thought it might be a five pin DIN but it isn`t; the five pin DIN I bought is arranged as follows: X X X X X The plug appears to have about a 3/8" barrel diameter. [There are two styles of 5 pin DIN: 180 degree circle and 240 degree circle. - tjk] Also, I am considering several cartridges for the above tonearm and would be interested in feedback on the Sumiko Blue Point vs a Shure V15 or the AudioQuest Ruby.... thanks, -- greg anders@autopsy.csd.sgi.com