TOMHO@PURCCVM.BITNET (Thomas I. M. Ho) (01/11/90)
I decided to cross-post this to ibmtcp-l as well as tn3270
----------------------------Original message----------------------------
Using the following:
Ultrix 3.1
tn3270 4.1.1 (right off ucbarpa.berkeley.edu last week)
vt100 definitions in /etc/termcap define a 24x80 screen
I am using telnet to logon to
VM/SP/HPO release 5 with IBM FAL TCP/IP 1.2.1.
HOWEVER, some screens such as the VM logon screen and whenever I use
"q disk" do not display correctly. Any ideas about what's wrong?
Also, often new screens do not completely write over previous screens.TROTH@RICEVM1.RICE.EDU (Rick Troth) (01/12/90)
>HOWEVER, some screens such as the VM logon screen and whenever I use >"q disk" do not display correctly. Any ideas about what's wrong? Try turning on "auto wrap" on your VT100 (or whatever is emulating a VT100). By default, the "terminal" does not move the cursor to the start of the next line when it gets to the end of the current line in most VT100/ANSI implementations. (some people prefer this; some don't) But the I/O routines used by TN3270 (parts of TERMCAP ?) expect it. Gee ... the trouble we go thru to save a CR/LF :-) Rick Troth <TROTH@RICEVM1.RICE.EDU> ------------- Rice ONCS VM Systems Support