[bit.listserv.ibmtcp-l] How do you configure an SNALINK host?

VMSP@NCSUVM.BITNET (Mike Whitt) (01/12/90)

How do you configure an SNALINK host so that the Internet can find it?
We're installing a new MVS system here, that will be NCP attached to our
VM system. We don't have a box (e.g.8232) to attach MVS to ethernet, yet.

       NCSUVM ---- 3725 ---- NCSUMVS
          |
        8232

From the Installation Manual, it looks like I should have, on the VM side:
HOME
   128.109.153.7   eth1        /* ncsuvm.ncsu.edu  = 128.109.153.7 */
   128.109.153.7   snaiucv1    /* ncsumvs.ncsu.edu = 128.109.153.8 */
GATEWAY
   128.109         =         eth1      1500    0.0.255.0      0
   128.109.153     =         snaiucv1  1500    0.0.0.255      8
   DEFAULTNET 128.109.193.3 ETH1 DEFAULTSIZE     0

How do the 8232 and VM Tcp/Ip know to route other Internet hosts requests
for 128.109.153.8 to NCSUMVS?

Thanks. -Mike.