[bit.listserv.i-amiga] Help needed to connect micro92 printer to Amiga 500

frank@buast7.bu.edu (Frank Sienkiewicz) (08/10/90)

I need some help:

I got a used Okidata u92 (micro92, that is) (IBM compatable graphics printer,
model number 5232G, serial number 201097, manufactured 1984)
without an owners manual or cables. The printer looks like it is 
in good shape, even the ribbon. It turns on, line and page feeds, etc. 

To solve the missing cable problem, a friend of mine gave me a Centronics 
cable to patch the printer into the SERIAL port of my Amiga 500.

I have Workbench release 1.3 version 34.20 installed and put the printer 
drivers for the u92 and the CBM MPS1000 (more on this later) in my 
preferences drawer. (COPY "Extras 1.3:devs/printers/<driver _name>" to
devs:printers") I was told that eventhough the u92 printer cable
is plugged into the serial port, you setup the printer default as a
parallel printer. Looking in "Amiga Enhancer Software" for version 1.3,
this booklet says the following:
- Dot matrix non-color printer; prints text and graphics
- Line feeds are always 7/72 of an inch (limitation of 
printer in graphics mode)
- One density is supported - 72x72 dpi. Select a density of 1.

Well, the paper is loaded correctly, cables are plugged in, did not change
the printer preference defaults, power is on, etc...

To test it, I try to print the startup-sequence. I state "type startup-sequence
to PRT:". And all i get is the following. "Printer mistake or out of paper."

I read somewhere that PC compatable printers also can be driven by the 
CBM MPS1000 printer driver, or at least this u92 Okidata can be, so I 
loaded that into the printer default settings. Nothing changed, same 
error message. 

Help! I don't know what else to do. What should the printer preference 
defaults be? Is it a serial or parallel printer (I tried both)? Do I 
have the right cable? Where can I get an owners manual for this printer?
Write Okidata? Or just go to a dealer? Am I typing the correct commands
to print the document to the right device, PRT: ??? 

Any help would be great.

Frank Sienkiewicz

Always trying to get something for nothing usually screws up the day.