CGTAYLO@ERENJ.BITNET (Clement Taylor) (02/03/90)
I hope this is an easy question requiring a very short answer. I want to put a second ethernet board in my 2.15C ANW server and connect it to the same network as the first board. I want to ECONFIG the new board so I can experiment with the BYU packet driver. SHOULD I USE A DIFFERENT NETWORK ADDRESS WITH THE SECOND BOARD or should I assign a new address much as I have done with the Interlan TCP/IP gateway that I have on another server? I know that I could try both and see what works but development time on the server in question is quite limited. Thanks, Clem Taylor