WOOGIE@UFPINE.BITNET (02/06/90)
Thanks to everyone who offered suggestions. I am now able to use qemm.sys. I set the switches as follows: device=qemm.sys fr=d000 on ma=2 ha=32 nv ns x=c000-cfff x=e000-e7ff x=b000-b7ff Most of these switches came from the local Zenith rep. However, the real problem I have had is that, for some reason, if the packet driver is loaded higher in memory than the ems driver, then nothing seems to work. Originally, I was loading the packet driver like this: wd8003e 0x60 0x3 0x280 0xd000 and qemm at c800. I have since switched this and all works fine now. Thanks again for the help. Mike