[bit.listserv.novell] Big servers

AJGREEN@IRLEARN.BITNET (Arthur Green) (01/10/90)

I'm in the process of setting up a 2.15 server with a 300MB disk. Given
the limit on volume size of 255MB, what are the optimum sizes for the
volumes? Currently I'm going for
SYS:   50MB
VOL1: 125MB
VOL2: 125MB
This is largely because our other servers have 125MB disks. Should I use
SYS: as the primary (ie 255MB) volume and use the other volumes for users
and applications? Should I make SYS: just for the NetWare stuff (MAIL, PUBLIC,
SYSTEM etc) and use VOL1 for everything else? Am I doing things completely
backwards?

Arthur Green
University College Dublin Computing Services

LARRY.H.BRADLEY@NRC.CA (01/11/90)

Arthur, what we have been doing here is creating a SYS: volume of
about 50 megs, and putting the rest into VOL1. We out the users on
VOL1, and the Netware stuff and most of our smaller software
packages on SYS.


*------------------------------------+----------------------*
|Larry Bradley                       |    LARRY@VM.NRC.CA   |
|Communications Manager              | Larry.Bradley@NRC.CA |
|National Research Council of Canada |    LARRY@NRCVM01     |
|Networks Branch                     |                      |
|M60, Montreal Road                  | (613)993-0240        |
|Ottawa, Canada  K1A 0R6             | FAX:(613) 954-2561   |
*------------------------------------+----------------------*

Fund@RELAY.PROTEON.COM (01/13/90)

>I'm in the process of setting up a 2.15 server with a 300MB disk. Given
>the limit on volume size of 255MB, what are the optimum sizes for the
>volumes? Currently I'm going for
>SYS:   50MB
>VOL1: 125MB
>VOL2: 125MB
>this is largely because our other servers have 125MB disks. Should I use
>SYS: as the primary (ie 255MB) volume and use the other volumes for users
>and applications? Should I make SYS: just for the NetWare stuff (MAIL, PUBLIC,
>SYSTEM etc) and use VOL1 for everything else? Am I doing things completely
>backwards?

>Arthur Green
>University College Dublin Computing Services

   There is no optimum size.  Everything is cached.  Practically speaking, you
   want to limit the number of volumes.  If you need to get to 'em, you will
   have to define a precious drive letter for each of them.  go with two
   volumes on the 300 meger.  The sizes are really not that important.

   Glenn Fund                           Internet:   Fund@Relay.proteon.com
   Principal Research Specialist        CompuServe: 75170,1060
   Sanders Associates                   cc:Mail     Fund at Proteonwebo
   DW Highway South                     Phone:      (603) 885-6242
   MS NHQ4-0138                         Director of The Greater Boston Area
   Nashua, NH  03061                    Novell Users Group.

      Co-Founder and President of the Affiliation of NetWare Users
                        "ANU Day Is Dawning"

CS471S07@UHCCUX.BITNET (02/08/90)

Dear Mr. Green:

We are Novell Gold Dealers in Hawaii.  We have as many people
doing the sceanario you mention either way, but I think I prefer
the second method - the SYS: volume as the smaller of the two.

Good Luck