CCGT@MUSICA.MCGILL.CA (Graham Thorpe) (02/03/90)
I have been trying to download some fonts to an HP Laserjet. Using the DOWNLOAD program supplied with the HP soft fonts does not seem to work. We have Netware 2.10 running over ARCNET. The capture command has been set as follows: CAPTURE TI=30 NB NFF.We have tried many different combinations without success. Here is the really strange part. If I login to another server on the network (running Netware 2.15) and then attach to the first one the download is successful to the same printer and print queue. We then suspected differences in the CAPTURE command. This did not make a difference, we tried the CAPTURE from 2.15 with the 2.10 network and it still didn't work. Does anyone have any suggestions ? Thanks
BEEBE@YALEMED.BITNET (Rick Beebe) (02/03/90)
>I have been trying to download some fonts to an HP Laserjet. >Using the DOWNLOAD program supplied with the HP soft fonts does not >seem to work. >We have Netware 2.10 running over ARCNET. The capture command has >been set as follows: CAPTURE TI=30 NB NFF.We have tried many different >combinations without success. If I err, here I apologize: I went straight from 2.0a to 2.15. In order to get downloaded fonts to work, you must specify "Byte Stream" instead of "Text". You can either do this in printcon, or (more easily) by specifying the NoTab flag on the capture command line. ----------------------------------------------------------------------------- Rick Beebe (203) 785-4566 ***** ***** ***** * * Biomedical Computing Unit * * * ** * Yale University School of Medicine * * *** * * * 333 Cedar Street, New Haven, CT 06514 * * * * ** * * * * * BEEBE@YALEMED.BITNET beebe%biomed.decnet@venus.ycc.yale.edu -----------------------------------------------------------------------------
CCMIKE@INDST.BITNET (Mike Fisher) (02/09/90)
Use NT with your capture command.