Bill.Burgess@f101.n229.z1.fidonet.org (Bill Burgess) (06/28/91)
Index Number: 16477 Donna, I have neither seen or heard of the Lavender Brailler before now but since you have drawn my attention to it, will look further into it. The Hall was similar in operation to the old typewriters in that the point of imprinting remained stationary and the paper moved by means of a carriage, as it is known in typewriter technology. The keyboard was similar to a Perkins but it has long ebony bars instead of the curved round keybuttons of the Perkins, and much lower. The spacebar is a square metal plate in the center of these and the backspace key is a large lever on the right side of the machine frame. Returning the carriage was by manually pushing it back, and the index or paper movement down the page was done by turning the knob at either end of the carriage. The platen, or roller on the carriage had a strip cut out of it with three small and very sharp spikes set into this area, with a spring loaded metal bar that came down on the paper and locked it in place via these spikes at the bottom of the page, similar to slates. And yes, it has a very rugged case that looks very professional. Antique perhaps, but I am very thankful to have received it and will give you an opportunity to see how it imprints very soon. In closing, just one question. What are the dates of the ACB convention? I got a GDUI tape in the mail two days ago but it is for 4 track half speed equipment and cannot be played here unless you can follow Donald Duck at a very high speed. Bye for now. Love and hugs always, Bill -- Uucp: ..!{decvax,oliveb}!bunker!hcap!hnews!229!101!Bill.Burgess Internet: Bill.Burgess@f101.n229.z1.fidonet.org