jmunkki@kampi.hut.fi (Juri Munkki) (01/07/90)
This is patch 1.1 of the Sega 3D glasses interface document. There was one more error in the document. This one doesn't cause any problems if you are writing your own software. I just had the TxD+ and TxD- pins reversed. All you have to do is swap the pins in miniDIN-8 connector. The pins can usually be pulled out, swapped and pushed back in again. No soldering is necessary to make this fix. I'm sorry for the bugs in the document, but luckily neither of the mistakes seem to cause any hardware problems. So far I've found one incorrect comment in the software, but it's pretty obvious, if you read carefully. I have heard that the glasses have been discontinued in the US. They are still available in Europe, so I guess that if you call Sega and ask them kindly enough, they might be able to sell you the glasses. If you are unable to get the glasses, please contact me. I don't know if I'll be able to do anything about it though. _._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._ | Juri Munkki jmunkki@hut.fi jmunkki@fingate.bitnet I Want Ne | | Helsinki University of Technology Computing Centre My Own XT | ^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^~^