jacobson@uxe.cso.uiuc.edu (01/12/90)
The following comment in the above reply brings up a question:
"P.S. Don't forget to clip/remove the 150 ohm "256K RAM" resistor if you're
adding 1 Mb SIMMS.
On my SE/30 I am thinking of adding some 1 MEG simms now that the price is
so low. Besides putting the 1 MEG simms in bank A (I am planning on adding
4 megs) and moving the 1 MEG of 256k simms to bank B is there anything like
this resistor to change or does moving the ram around in the banks do all
that is necessary. When open this machine I don't want to have to do it
twice given how cramped it will likely be. Also with the SE/30 are there
any other things I should know? Is there any documentation available on
adding ram to the SE/30 like I have seen for the regular SE? Thanks much!
Russ Jacobson
Illinois Geological Survey
Champaign, IL 61820
217-244-2425