alex@grian.cps.altadena.ca.us (Alex Pournelle) (02/07/90)
steveg@umd5.umd.edu (Steve Green) writes: >In article <1990Feb6.113438.11827@grian.cps.altadena.ca.us> alex@grian.cps.altadena.ca.us (Alex Pournelle) writes: >]OK, now that I have my internal Mac Plus disk drive back--and have lost >]the connector cable--somebody please tell me which lines to cut on an SE >]ribbon so I can use it instead! >Counting the wires on the ribbon cable, start with the end that has the colored >stripe on it and call that wire #1. Then cut #9 and #20. >If you are not sure what end to start with, look on the connectors for a >small arrow. That should signify pin #1. Thanks, much! I appreciate! (And for the rest of you guys--if it's "red", it's a SE cable; "yellow" is a Plus cable. That's the pin-one edge color.) Alex