hklee@blake.acs.washington.edu (Hyeon Kyu Lee) (02/28/90)
Hi, Netters; I have an Mac SE and want to upgrade it. From the recent "Mac World", I found that Mac Product USA offers a quite inexpensive accelerator board. (Less than $600 for 16MHz 68030 board.) Is there anyone who are familiar to this board or have experiences with it? Or, is there any other upgrading way that I should consider? Any information will be welcomed. Or summary of upgrade... If there are enough responses, I will post the summary. Thanks in advance. H.K.Lee hklee@blake.acs.washington.edu
6600bike@hub.UUCP (Puneet Pasrich) (02/28/90)
From article <6061@blake.acs.washington.edu>, by hklee@blake.acs.washington.edu (Hyeon Kyu Lee): > > I have an Mac SE and want to upgrade it. From the recent "Mac World", > I found that Mac Product USA offers a quite inexpensive accelerator > board. (Less than $600 for 16MHz 68030 board.) Don't go through MacProdcuts! I bought a Microtech 300Z from them, and _they_ didn't ship the SCSI box that comes with it. And they blamed it on _me_!!! Scum. I called them enough that they dealt with it, but it was too much of a pain. I'll gladly spend a couple extra bucks so that I don't have to deal with them. A very unhappy customer (with MacProducts); the scanner itself is RAD, ___________________________________________________________ |Puneet Pasrich | Internet: 6600bike@ucsbuxa.ucsb.edu | |Karate Kid | Bitnet: 6600bike@ucsbuxa.bitnet | |'Just do it!' | |